EGO Flash Instalační příručka stáhnout pdf (Strana 15)

the 14-pin plug) should be connected to „Phone Out“, and the purple lead (pin 7 of the 14-pin plug) to „Phone In +“ of the Mini-ISO

socket.

For information on the phone connection options of your car audio system, please consult the manufacturer‘s user manual.

NOTE: If your car audio system has different phone connection options from those mentioned here, please consult a qualiﬁed pro-

fessional for installation of the system. Furthermore, please read the section with information on connecting the mute lead of the

ISO connection cable, “6.5.1 Checking the mute input”.

6.5 Installation of the ISO connecting cable

The battery must be disconnected before starting cable installation. Disconnect the grounding cable from the negative pole of the

battery. The cable installation procedure is shown in the illustrations.

When the installation is completed,

reconnect the grounding cable to the

negative pole of the battery.



Fig. 07:

Installation

procedure

Connect 14-pin ISO

connecting cable to

EGO FLASH

Disconnect car wiring

harness from car radio

Connect EGO FLASH ISO

connector to car radio

Connect EGO FLASH ISO connectors to car

wiring harness ISO connectors

Connect yellow mute lead to

one of the three mute inputs

(see table)

Car audio

Electronics box

1 2 ... 10 11 12 13 14 15 16 17 18 19 20 ... 50 51

Žádné komentáře

EGO Flash Instalační příručka Strana 15